PRE-RELEASE
Water Pump Installation
| Water Pump Installation |
Special Tools
EN 46104 Water Pump Pulley Holding ToolFor equivalent regional tools, refer to Special Tools .
| 1. |
Ensure that the engine front cover and water pump are clear of old gasket material.
|
|
| 2. |
Place a new water pump gasket on the water pump.
|
|
| 3. |
Place the water pump in position on the front cover.
|
|
| 4. |
Refer to
Fastener Caution
.
Install the water pump bolts and tighten to 10 Nm (89 lb in) . |
|
| 5. |
Install the water pump pulley.
|
|
| 6. |
Loosely install the water pump pulley bolts.
|
|
| 7. |
Install the
EN 46104
tool (1) onto the water pump pulley and tighten the pulley bolts to
10 Nm (89 lb in)
.
. 
|
|
