Heated Oxygen Sensor Replacement - Sensor 1 (LLU/A16LET)
|
|
Heated Oxygen Sensor Replacement - Sensor 1 (LLU/A16LET)
|
|
Callout
|
Component Name
|
Preliminary Procedure
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
1
|
Heated Oxygen Sensor 1
Refer to
Fastener Caution
.
Procedure
Disconnect the electrical connector of the heated oxygen sensor 1.
|
Note
|
|
When re-using the heated oxygen sensor, coat the thread with assembly paste.
|
Tighten
24 Nm (18 lb ft)
Special Tools
CH 6179 (SA9603E)
Oxygen Sensor Wrench Remover/Installer
For equivalent regional tools, refer to
Special Tools
.
|
