SAAB WIS ONLINE

PRE-RELEASE

Accelerator Pedal Position Sensor Replacement

Accelerator Pedal Position Sensor Replacement



Callout Component Name

Preliminary Procedure

1. Remove the instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Driver Side .

2. Release the electrical connector.


1

Accelerator Pedal Fastener

Refer to Fastener Caution .

Tighten

3.5 Nm (36 lb in)

2

Accelerator Pedal Assembly


Procedure

1. Twist the accelerator pedal upwards.

2. Move the accelerator pedal downwards.

3. Remove the Accelerator pedal.


3

Accelerator Pedal Position Sensor

Procedure

Release the retainers to remove the accelerator pedal position sensor.



PRE-RELEASE