PRE-RELEASE
DTC P0313
| DTC P0313 |
| Diagnostic Instructions |
| • |
Perform the
Diagnostic System Check - Vehicle
prior to using this diagnostic procedure.
|
|
| • |
Review
Strategy Based Diagnosis
for an overview of the diagnostic approach.
|
|
| • |
Diagnostic Procedure Instructions
provides an overview of each diagnostic category.
|
|
| DTC Descriptor |
DTC P0313 00
Misfire Detected With Low Fuel Level
| Circuit/System Description |
This DTC indicates a critical low fuel content. The DTC is set to prevent the fuel system for an air contamination.
| Conditions for Running the DTC |
Engine is running
| Conditions for Setting the DTC |
The ECM detects a critical low fuel content
| Action Taken When the DTC Sets |
DTC P0313 is a Type C DTC
| Conditions for Clearing the DTC |
DTC P0313 is a Type C DTC
| Reference Information |
Schematic Reference
Engine Controls Schematics
Connector End View Reference
Component Connector End Views
Electrical Information Reference
| • |
Circuit Testing
|
|
| • |
Connector Repairs
|
|
| • |
Testing for Intermittent Conditions and Poor Connections
|
|
| • |
Wiring Repairs
|
|
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions
Scan Tool Reference
Control Module References
| Circuit/System Verification |
| 1. |
Verify that the DTC sets outside of the Conditions for Running and Setting. Since most occurrences of this DTC are caused by low fuel content, review with the customer the conditions under which the DTC set.
|
|
| 2. |
If the DTC set within the Conditions for Running and Setting, the Engine is operating as designed.
|
|
| 3. |
Refill the fuel tank with diesel
|
|
| 4. |
Operate the vehicle within the conditions that the customer experienced and verify the DTC does not reset.
|
|
| 5. |
If the DTC resets, replace the K20 Engine Control Module.
|
|
| Repair Instructions |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References
