SAAB WIS ONLINE

PRE-RELEASE

Engine Coolant Temperature Sensor Replacement

Engine Coolant Temperature Sensor Replacement



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .

3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

4. Remove the ventilation hose from the oil level indicator tube.

5. Loosen the oil level indicator tube.


1

Engine Coolant Temperature Sensor

Refer to Fastener Caution .

Procedure

Disconnect the electrical connector.

Tighten

30 Nm (22 lb ft)



PRE-RELEASE