SAAB WIS ONLINE

PRE-RELEASE

Brake Pedal Position Sensor Replacement

Brake Pedal Position Sensor Replacement



Callout Component Name

Preliminary Procedure

Remove the instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Driver Side .

1

Brake Pedal Position Sensor Bolt

Refer to Fastener Caution .

Tighten

2 Nm (18 lb in)

2

Brake Pedal Position Sensor


Procedure

1. Disconnect the electrical connector.

2. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .




PRE-RELEASE