Transmission Fluid Replacement
|
|
Transmission Fluid Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedure
|
1
|
Transmission Drain Plug
Warning
|
|
In order to reduce hydraulic pressure, ensure that the folding top has not been operated for 6 minutes before performing this procedure. Failure to do so may result in personal injury.
|
|
|
|
|
|
|
Warning
|
|
When the transmission is at operating temperatures, take necessary precautions when removing the check/fill plug, to avoid being burned by draining fluid.
|
|
|
|
|
|
Refer to
Fastener Caution
.
Procedure
|
1.
|
Place pan under transmission to collect fluid.
|
|
2.
|
Allow transmission fluid to drain out for approximately 10 minutes.
|
Tighten
30 Nm (22 lb ft)
|
2
|
Transmission Filler Plug
Tighten
30 Nm (22 lb ft)
|
3
|
Transmission Fluid
Procedure
|
•
|
Fill up with 2.2 liters (AWD: 1,6 liters) of transmission fluid, a residue of approximately 0.2 liters remains in the gearbox.
|
|
•
|
If a new gearbox is installed during servicing, this must be filled with 1.8 liters of transmission fluid because the new gearboxes are already filled with 0.68 liters of transmission fluid in the works.
|
|
