Brake System Slow Release
|
|
Brake System Slow Release
|
|
Step
|
Action
|
Yes
|
No
|
DEFINITION: The brake system is released and returns slowly to rest position. The vehicle is stopped from moving for a brief moment after the brake pedal is released.
|
1
|
Were you sent here from the Hydraulic Brake Symptom table?
|
Go to
|
Go to
Symptoms - Hydraulic Brakes
|
2
|
|
1.
|
Inspect the hydraulic brake system for the following conditions.
|
|
|
•
|
Improper operation of caliper pistons
|
|
|
•
|
Internally damaged flexible brake hoses; hindering brake release
|
|
|
•
|
Contaminated brake fluid
|
|
|
•
|
Damaged or improperly operating master cylinder
|
Did you find and correct a condition?
|
Go to
|
Go to
|
3
|
|
1.
|
Inspect the brake assist system for the following conditions.
|
|
|
•
|
Binding, bent or damaged pedal pushrod, pedal, or pedal bracket
|
|
|
•
|
Damaged or improperly operating vacuum booster, if equipped
|
|
|
•
|
Damaged or improperly operating hydraulic booster, if equipped
|
|
2.
|
Adjust, repair or replace components as necessary.
|
Did you find and correct a condition?
|
Go to
|
Go to
|
4
|
|
1.
|
Inspect the disc brake system for the following conditions.
|
|
|
•
|
Damaged or excessively worn caliper hardware and/or lining hardware
|
|
|
•
|
Distorted or damaged linings
|
|
|
•
|
Lack of lubrication or excessive corrosion on metal to metal contact surfaces
|
|
|
•
|
Bent or damaged caliper or mounting component
|
Did you find and correct a condition?
|
Go to
|
Go to
Symptoms - Hydraulic Brakes
|
5
|
|
1.
|
Install or connect any components that were removed or disconnected during diagnosis.
|
Is the condition still present?
|
Go to
|
System OK
|
