SAAB WIS ONLINE

PRE-RELEASE

Knuckle Replacement (GNC)

Knuckle Replacement (GNC)



Callout Component Name

Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. Remove rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement .

4. Remove the rear spring. Refer to Rear Spring Replacement (GNC) Rear Spring Replacement (GNE) .

5. Remove the rear wheel bearing and hub. Refer to Rear Wheel Bearing and Hub Replacement (GNE, AWD) Rear Wheel Bearing and Hub Replacement (GNE, FWD) Rear Wheel Bearing and Hub Replacement (GNC) .

6. Remove the rear bolts from the trailing arm. Refer to Trailing Arm Replacement .

7. Remove the lower shock absorber bolt from the knuckle. Refer to Shock Absorber Replacement (GNC) Shock Absorber Replacement (GNE) .

8. Remove the stabilizer shaft to knuckle bolt. Refer to Stabilizer Shaft Replacement (GNC) Stabilizer Shaft Replacement (GNE FWD) .

9. Remove the adjust link to knuckle bolt. Refer to Adjust Link Replacement (GNC) Adjust Link Replacement (GNE) .


1

Steering Knuckle

Procedure

Use a proper jack stand to load the knuckle when tightening the fasteners.



PRE-RELEASE