SAAB WIS ONLINE

PRE-RELEASE

Rear Axle Lower Control Arm Replacement (GNC)

Rear Axle Lower Control Arm Replacement (GNC)



Callout Component Name

Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. Remove the rear spring. Refer to Rear Spring Replacement (GNC) Rear Spring Replacement (GNE) .


1

Rear Suspension Link Inner Fastener

Refer to Fastener Caution .


Procedure

1. Install NEW bolt.

2. Torque on nut.


Tighten

90 Nm (66 lb ft) + 60 degrees

2

Rear Axle Lower Control Arm

Procedure

Check the rear alignment after installation. Refer to Wheel Alignment Measurement .



PRE-RELEASE