SAAB WIS ONLINE

PRE-RELEASE

Air Conditioning Evaporator Hose Assembly Replacement (LLU/A16LET)

Air Conditioning Evaporator Hose Assembly Replacement (LLU/A16LET)



Callout Component Name

Preliminary Procedure

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .

2. Remove the front bumper fascia assembly. Refer to Front Bumper Fascia Replacement

3. Remove the Headlamp - Right Side. Refer to Headlamp Replacement .

4. Remove the engine mount. Refer to Engine Mount Replacement - Right Side .

5. Remove the A/C Compressor and Condenser Hose from the A/C Evaporator Hose. Refer to Air Conditioning Compressor and Condenser Hose Replacement (LBS/A20DTH) Air Conditioning Compressor and Condenser Hose Replacement (LAU/A28NER) Air Conditioning Compressor and Condenser Hose Replacement (LLU/A16LET) Air Conditioning Compressor and Condenser Hose Replacement (LBY/A20DTR) Air Conditioning Compressor and Condenser Hose Replacement (LHU/A20NFT) .


1

A/C Evaporator Hose Fastener

Refer to Fastener Caution .

Tighten

20 Nm (15 lb ft)

2

A/C Evaporator Hose Stud Bolt

Tighten

15 Nm (11 lb ft)

3

A/C Evaporator Hose Assembly


Procedure

1. Remove the A/C Evaporator hose from the thermal expansion valve (TXV).

2. Remove and discard the sealing washer. Refer to Air Conditioning System Seal Replacement .


4

A/C Evaporator Hose Fastener

Procedure

Remove the A/C Evaporator Hose from the A/C Condenser and cap hose.

Tighten

20 Nm (15 lb ft)

5

Sealing Washer

Procedure

Remove and discard the sealing washer. Refer to Air Conditioning System Seal Replacement .

6

Air Conditioning Evaporator Hose Assembly


Procedure

1. Release the A/C Evaporator Hose from the attaching clips.

2. When the installation is postponed, close the off lines and connections.




PRE-RELEASE