Sunroof Sunshade Replacement
|
|
Sunroof Sunshade Replacement
|
|
1.
|
Open the sunshade.
|
|
3.
|
|
Important
|
|
The sunshade is blocked and cannot roll open.
|
|
|
Lock the sunshade.
|
|
|
3.1.
|
Manually roll the sunshade until the notch (1) is almost vertical to the sunshade.
|
|
|
3.2.
|
Place a bolt pin (2) approximately 1 mm (0.04 in) thick on the left side in the notch in order to prevent the rolling open of the sunshade spring.
|
|
4.
|
Remove the rear crossmember.
Remove the 4 bolts (1) and remove the rear crossmember.
|
|
5.
|
Remove the sunshade at the rails.
Remove the 2 bolts (1).
|
|
6.
|
Remove sunshade.
Disconnect the sunshade (90 degree rotation) and remove.
|
|
1.
|
|
Important
|
|
Ensure that the sunshade cover is correctly placed into the guide (1)
|
|
|
Insert the sunshade.
|
|
|
1.1.
|
Insert the sunshade into the guide and lock into position.
|
|
|
1.2.
|
Insert the sunshade in the guide rails until the stop (2).
|
|
2.
|
Install the sunshade at the rails.
Tighten
Tighten the 2 bolts to 2.5 Nm (22 lb in).
|
|
3.
|
Install the rear crossmember.
|
|
4.
|
Disconnect the sunshade.
Remove the pin.
Tighten
Tighten the sunshade.
|
