Sunroof Window Replacement - Front
|
|
Sunroof Window Replacement - Front
|
|
2.
|
Open the sunroof to the vent position.
|
|
3.
|
|
Note
|
|
Ensure the position disk does not drop off.
|
Remove the sunroof window rear bolts, two on each side.
Remove the 4 bolts.
|
|
4.
|
Open the sunroof to the half open position.
|
|
5.
|
|
Note
|
|
Ensure the position disk does not drop off.
|
Remove the front window bolts, one on each side.
Remove the 2 bolts.
|
|
1.
|
Insert the window.
Align and insert the window on one side.
|
|
2.
|
|
Note
|
|
Position disk may not rotate, since it can cause scratches in the rear glass cover.
|
Install the front window.
|
|
|
2.1.
|
Insert the 2 long position window panes (1) if equipped.
|
|
|
2.2.
|
Install the 2 screws (3) with washers (2).
|
|
3.
|
Close the sunroof until the rear part is in the vent position.
|
|
4.
|
|
Note
|
|
Position disk may not rotate, since it can cause scratches in the rear window.
|
Install the sunroof window rear bolts.
|
|
|
4.1.
|
Insert the 4 long position window panes.
|
|
|
4.2.
|
Install the 4 screws with washers.
|
|
5.
|
Close the sunroof.
Inspect the gap 11.0 + or -0.3 mm (0.43in).
|
|
6.
|
Refer to
Fastener Caution
Tighten the sunroof, rear.
Press the seal lightly down (arrow).
Tighten
Tighten the 4 bolts to 4 Nm (35 lb in).
|
|
7.
|
Open the sunroof to the half open position.
|
|
8.
|
Tighten the sunroof window front bolts.
Tighten
Tighten the 2 bolts to 4 Nm (35 lb in).
|
|
9.
|
Install the front air deflector covers.
Insert and clip in covers.
|
|
10.
|
When replacing the motor. Refer to Sunroof Motor/Actuator Initialization/Teach Process.
|
|
11.
|
Verify the operation of the sunroof.
|
