PRE-RELEASE
Form ”Acceptance inspection”
| Form ”Acceptance inspection” |
This form is to be used for acceptance inspection and in-storage care of the car with the specified chassis number.
Fill in the form and keep it in the car until the car is made ready for delivery.
|
Chassis No.:
|
Mileage (odometer reading):
|
|
Acceptance inspection date:
|
Signature:
|
|
Dealer:
|
Dealer number:
|
|
1 Check that the specification of the car coincides with the order form (this also applies to optional equipment).
|
Nothing to report
|
Signature:
|
|
Discrepancy:
|
Signature:
|
|
|
2 Check that the spare wheel, tools and other equipment supplied with the car are present.
|
Nothing to report
|
Signature:
|
|
Missing:
|
Signature:
|
|
|
3. Check the battery voltage. See instructions.
|
Fully charged (12.4 - 12.72 V)
Charge (12.0 - 12.4 V) Change (below 12.0 V) |
Signature:
|
|
4. Clean the car and inspect it for bodywork and paintwork damage *). Make note of any damage, see illustration.
0 = Sheet metal damage X = Paintwork damage |
Nothing to report
|
Signature:
|
|
Make a note of the damage:
|
Signature:
|
|
|
5. Check the interior of the car for damage.
|
Nothing to report
|
Signature:
|
|
Make a note of the damage:
|
Signature:
|
|
|
6. If the paint protector has been removed, apply fresh paint protector if the car is to be stored outdoors.
|
Indoor storage:
|
Signature:
|
|
Paint protector applied:
|
Signature:
|
*) If Saab Automobile AB transit damage insurance is to be used, a transit damage report must be completed.
