PRE-RELEASE
Fault diagnosis, no sound from one of theloudspeakers
| Fault diagnosis, no sound from one of the loudspeakers |
Fault symptom
No sound from one of the speakers.Diagnostic procedure
| 1. |
Use an ohmmeter to check
whether there is an open circuit in the loudspeaker voice coil, see
.
For connector B on the radio-cassette, see table on this page. |
|
| 2. |
If the reading obtained is not OK, expose the loudspeaker in question so that the
connector pins are accessible.
|
|
| 3. |
Check the wiring for continuity/shorting between the loudspeaker connector
and the corresponding connector on the radio-cassette, as follows:
Connector B on the radio
|
||||||||||||||||||||||||||||
| 4. |
Continue on
.
|
|
