PRE-RELEASE
Fault diagnosis, no sound/no display onSID
| Fault diagnosis, no sound/no display on SID |
Fault symptom
No sound at all.No radio display on SID.
Diagnostic procedure
| 1. |
Check whether fuse 13
is intact and live.
|
|
| 2. |
Check whether fuse 9 is intact for radio mode and that it is live.
|
|
| 3. |
Check that battery voltage is present on pin 4 of connector A at the rear of the
radio.
|
|
| 4. |
Check that battery voltage is present on pin 7 of connector A at the rear of the
radio when supplied with +X power.
|
|
