PRE-RELEASE
Test mode
| Test mode |
Pressing the RDS button and then switching on the radio will put the system in test mode, provided that the last mode was radio.
The display will show "TEST MODE" for 5 seconds.
Test mode ends with "POWER OFF".
| Test mode functions |
The following test functions are available on condition that RDS reception is obtained and that the RDS is activated.
| 1. |
Display current PI code.
Press RDS + 1 = displayed for 5 seconds. |
|
| 2. |
Display PTY code.
Press RDS + 3 = displayed for 5 seconds. |
|
| 3. |
Display current frequency or station name.
Press RDS + 4 = displayed for 5 seconds. |
|
| 4. |
Display current frequency continuously.
Press RDS + 5. |
|
