Front heated oxygen sensor (1) (before threeway catalytic converter)
|
|
Front heated oxygen sensor (1) (before three
way catalytic converter)
|
|
1.
|
Remove the resonating
chamber.
|
|
2.
|
Unplug the sensor wiring connector.
|
|
3.
|
Before removing the wiring, note how it is run and the positions of any cable
ties.
|
|
4.
|
Raise the car and remove the oxygen
sensor.
|
|
Important
|
|
Before fitting, lubricate the threads with Molycote 1000 or the equivalent.
|
|
|
Fit in reverse order.
Tightening torque 55 Nm (33 lbf
ft)
|
Important
|
|
When securing the wiring, take care to ensure that it will not come into contact with the
exhaust pipe.
|
|
|
