PRE-RELEASE
Knock sensor
| Knock sensor |
| To remove |
| 1. |
Remove the resonating
chamber.
|
|
| 2. |
Remove the dipstick tube.
|
|
| 3. |
Raise the car and unplug the knock sensor's connector.
|
|
| 4. |
Remove the knock sensor.
|
|
| To fit |
| Important | ||
|
Before fitting, the knock sensor's contact surface in the engine block should be meticulously cleaned. |
||
Tightening torque 22 Nm (16 lbf ft)
In other respects fit in reverse order.
