PRE-RELEASE
Rear heated oxygen sensor (2) (after threeway catalytic converter)
| Rear heated oxygen sensor (2) (after three way catalytic converter) |
| To remove |
| 1. |
Remove the resonating
chamber.
|
|
| 2. |
Unplug the sensor wiring connector.
|
|
| 3. |
Before removing the wiring, note how it is run and the positions of any cable
ties.
|
|
| 4. |
Raise the car and remove the oxygen
sensor.
|
|
| To fit |
| Important | ||
|
Before fitting, lubricate the threads with Molycote 1000 or the equivalent. |
||
Fit in reverse order.
Tightening torque 55 Nm (33 lbf ft)
