PRE-RELEASE
Secondary air injection pump and filter
| Secondary air injection pump and filter |
| To remove |
| 1. |
Remove the lower section and
the bottom half of the left-hand side of the spoiler.
|
|
| 2. |
Remove the three retaining bolts, unplug the connector and disconnect the
hoses from the pump.
|
|
| 3. |
Lift out the pump.
|
|
| 4. |
Undo the filter retaining bolt and remove the filter with
hose.
|
|
| To fit |
Fit in reverse order.
| Note | ||
|
The arrow on the valve should point in the direction of the air flow. |
