PRE-RELEASE
Throttle body
| Throttle body |
| To remove |
| 1. |
Remove the resonating
chamber.
|
|
| 2. |
Disconnect the throttle cable and Cruise Control cable, if fitted.
|
|
| 3. |
Unscrew the expansion tank filler cap to release the pressure in the cooling
system.
|
|
| 4. |
Remove the IAC valve and the crankcase breather hose.
|
|
| 5. |
Disconnect the coolant hoses from the throttle body.
|
|
| 6. |
Disconnect other hoses from the throttle body.
|
|
| 7. |
Remove the throttle position sensor.
|
|
| 8. |
Remove the 4 retaining screws and lift away the throttle
body.
|
|
| To fit |
| 1. |
Check the condition and
positioning of the O-ring.
|
|
| 2. |
Refit the throttle body and tighten the retaining screws.
Tightening torque 8 Nm (6 lbf ft) |
|
| 3. |
Refit the throttle position sensor.
|
|
| 4. |
Check the setting of the throttle valve, see Fig. If necessary, adjust it by
slackening 2 screws and then moving the bracket in the desired direction. See
.
|
|
| 5. |
Reconnect all hoses as well as the throttle cable and Cruise Control cable, if
fitted.
|
|
| 6. |
Refit the IAC valve.
|
|
| 7. |
Refit the resonating chamber.
|
|
| 8. |
Check functionality.
|
|
