PRE-RELEASE
Throttle position sensor
| Throttle position sensor |
| To remove |
| 1. |
Remove the resonating
chamber.
|
|
| 2. |
Disconnect the crankcase breather hose and the IAC valve with
hoses.
|
|
| 3. |
Unplug the connector, remove the two retaining screws and remove the sensor.
Note the O-ring.
|
|
| To fit |
| 1. |
Make sure that the O-ring is
correctly positioned and fit the sensor on the throttle spindle. Tighten the retaining
screws.
|
|
| 2. |
Plug in the connector, refit the IAC valve with hoses and reconnect the
crankcase breather hose.
|
|
| 3. |
Refit the resonating chamber.
|
|
