PRE-RELEASE
Ignition discharge module
| Ignition discharge module |
| To remove |
| 1. |
Unplug the connector.
|
|
| 2. |
Remove the 4 bolts.
|
|
| 3. |
Lift up the ignition discharge module.
|
|
| To fit |
Fit in reverse order.
Tightening torque 11 Nm (8.1 lbf ft)
| Changing the spring |
| 1. |
Turn the ignition discharge
module upside down and remove the 8 screws.
|
|
| 2. |
Lift off the black bottom part of the ignition discharge module.
|
|
| 3. |
To change the spring, use a screwdriver to prise out the old
spring.
|
|
| 4. |
Then fit the new spring in place.
|
|
