PRE-RELEASE
Throttle position sensor
| Throttle position sensor |
| To remove |
| 1. |
Take off the engine cover.
|
|
| 2. |
Remove the idle air control valve with hoses.
|
|
| 3. |
Unplug the connector, remove the two retaining bolts and remove the sensor.
Note the O-ring.
|
|
| To fit |
| 1. |
Make sure that the O-ring is
correctly positioned and fit the sensor on the throttle spindle. Tighten the retaining screws.
|
|
| 2. |
Plug in the connector and idle air control valve.
|
|
| 3. |
Fit the cover in place.
|
|
