SAAB WIS ONLINE

PRE-RELEASE

"READ ON/OFF" command menu

"READ ON/OFF" command menu

ISAT scan tool display

Function

DIAGNOSTIC STATUS

This command has the following submenus:

• EVAP

• THREE WAY CATALYTIC CONVERTER

• FRONT HEATED OXYGEN SENSOR (oxygen sensor 1)

• REAR HEATED OXYGEN SENSOR (oxygen sensor 2)

• PREHEAT OXY SENSOR FRONT.

• TRIP OBD II

Each command produces an answer indicating whether the corresponding OBD II diagnosis has been monitored.

Answer: "READY"/"NOT READY"

CLOSED LOOP

YES/NO

Internal Trionic status indicating whether closed loop is active (=YES).

CHECK ENGINE request

YES/NO

Input signal from transmission control module indicating whether the transmission has stored any emission-related OBD II diagnostic trouble code (=YES).

PREHEAT OXY SENSOR FRONT

ON/OFF

Internal Trionic status indicating whether the oxygen sensor's heating circuit is activated (=ON).

PREHEAT OXY SENSOR REAR

ON/OFF

Internal Trionic status indicating whether the oxygen sensor's heating circuit is activated (=ON).

ENGINE TORQUE LIMITATION

ON/OFF

Input from transmission control module, see "Test readings, control module connections".

DRIVE ON/ OFF

Input signal from transmission control module indicating gear position. Range of measurement: P, N = "OFF" = 0 V D, 3, 2, 1 = "ON" = 12 V

BRAKE LIGHT SWITCH

ON/OFF

Input from brake light switch. "ON" = 12 V, "OFF" = 0 V

CRUISE CONTROL

ON/OFF

Input signal from Cruise Control system's control module. "ON" = 0 V, "OFF" = 12 V

A/C IN

ON/OFF

Input signal from ICE via antifrost thermostat. "ON" = 12 V, "OFF" = 0 V

A/C OUT

ON/OFF

Output to A/C relay/compressor. "ON" = 0 V, "OFF" = 12 V

CHECK ENGINE LAMP

ON/OFF

Output to main instrument display panel. "ON" = 0 V, "OFF" = 12 V

SHIFT UP LAMP

ON/OFF

Output to main instrument display panel. "ON" = 0 V, "OFF" = 12 V

PUMP RELAY

ON/OFF

Output to fuel pump relay. "ON" = 0 V, "OFF" = 12 V

MAIN RELAY

ON/OFF

Output to main relay. "ON" = 0 V, "OFF" = 12 V

KNOCK CONTR ACTIVE

YES/NO

Internal Trionic status indicating whether ignition retarded on account of knock control (=YES).

IDLING SPEED

YES/NO

Internal Trionic status indicating whether idle position present (=YES).



PRE-RELEASE