Positive cable attachment beside automatictransmission fluid pipe
|
MODIFICATION INSTRUCTION
|
|
Bulletin Nbr:
|
311-1629
|
|
Date:
...........
|
JUNI 1995
|
|
Market:
|
ALL
|
|
|
Positive cable attachment beside automatic
transmission fluid pipe
|
Saab 900 M95 and M96 with turbo engine and automatic between chassis
numbers: S2000001-S2033849 - T2000001-T2000167
Attachment of positive cable beside the automatic transmission fluid level pipe is
inadequate. This is partly the fault of the nut securing the fluid level pipe bracket, and partly
that of the positive cable clamp which does not lock properly. This can cause the fluid level
pipe to become detached, resulting in leakage, and can cause the positive cable to come too
close to the exhaust pipe, resulting in it melting.
As the positive cable has a new fixing, the attachment of the positive and negative leads
to the battery tray must also be changed.
79 69 405 Clip
47 38 100 Clamp
80 73 512 Locknut
79 78 109 Screw
44 11 369 Holder
|
1.
|
Remove the nut and clamp
beside the oil dipstick bracket on the transmission.
|
|
2.
|
Discard the nut and clamp.
|
|
3.
|
Attach the oil dipstick bracket to the transmission using the locknut in the
modification kit.
|
|
4.
|
Remove the automatic transmission dipstick.
|
|
5.
|
Thread the clamp on to the dipstick pipe right down to the pipe bracket.
Note the appearance of the clamp in order to fit it correctly, see drawing.
|
|
7.
|
Fit the new holder to the battery tray and attach the positive and negative leads,
see drawing.
|
|
8.
|
Thread the rubber-covered cable clip on to the positive cable. Attach the clip in
the previously fitted clamp.
|
|
Standard time information
|
As per separate information.
