PRE-RELEASE
Headlamp wipers
| Headlamp wipers |
The headlamp wipers and washer motor can only be started when the ignition switch is in the Drive position.
| 1. |
Check that fuses 31 and 10 are
intact and supplied with current.
|
|
| 2. |
Check that current is present on pin 6 of the stalk switch and on the connections
of the wiper motors.
|
|
| 3. |
Move the stalk switch towards the steering wheel rim and check that current is
supplied to the wiper motors and the washer motor.
|
|
| 4. |
Check the connectors, wiring and ground connections.
|
|
