PRE-RELEASE
INSTALLATION
| INSTALLATION |
| Note | ||
|
Wipe off any oil or water on the belt and pulley. |
| FRONT SIDE BELT |
Install a V belt (C), and tighten the slider bolt so as to obtain the specified belt tension.
Tighten the lock bolt (A).
Tighten the slider bolt (B).
Tightening torque:
Lock bolt (A):
25 Nm (2.5 kgf-m, 18.1 ft-lb)
| REAR SIDE BELT |
Install the belt tensioner.
Install a V belt, and tighten the slider bolt (B) so as to obtain the specified belt tension.
Tighten the lock nut (A).
Tightening torque:
Lock nut (A);
23 Nm (2.3 kgf-m, 17.0 ft-lb)
