PRE-RELEASE
DTC 13 CLUTCH SWITCH
| DTC 13 CLUTCH SWITCH |
TROUBLE SYMPTOM:
| • |
Cruise
control cannot be set.
|
|
| • |
Cruise control cannot be released.
|
|
WIRING DIAGRAM:
CHECK CLUTCH SWITCH CIRCUIT.
Turn the ignition switch to OFF.Disconnect the clutch switch harness connector.
Turn the ignition switch to ON.
Measure the voltage between harness connector terminal and chassis ground.
Connector & terminal
(B107) No. 2 (+) — Chassis ground (−):
Is the voltage more than 10 V?
| Yes |
| No |
| • |
Check the fuse No. 18 (fuse & relay box).
|
|
| • |
Check the harness for open or short between clutch switch
and fuse & relay box.
|
|
CHECK CLUTCH SWITCH CIRCUIT.
Turn the ignition switch to OFF.Disconnect the ECM harness connector.
Measure the resistance between clutch switch harness connector terminal and ECM harness connector terminal.
Connector & terminal
(B107) No. 1 — (B134) No. 10:
Is the resistance less than 10 Ω?
| Yes |
| No |
Repair the harness.
CHECK CLUTCH SWITCH.
Remove and check the clutch switch.
Is the clutch switch OK?
| Yes |
Clutch switch circuit is OK.
| No |
Replace the clutch switch.
