PRE-RELEASE
DTC 51 VALVE RELAY ON FAILURE
| DTC 51 VALVE RELAY ON FAILURE |
DIAGNOSIS:
Faulty valve relay
TROUBLE SYMPTOM:
ABS does not operate.
WIRING DIAGRAM:
CHECK VALVE RELAY IN ABSCM&H/U.
Disconnect the connector from ABSCM& H/U.Measure the resistance between ABSCM&H/U terminals.
Terminals
No. 14 — No. 15:
Is the resistance more than 1 MΩ?
| Yes |
| No |
Replace the ABSCM&H/U.
CHECK POOR CONTACT IN CONNECTORS.
Is there poor contact in connectors between generator, battery and ABSCM&H/U?
| Yes |
Repair the connector.
| No |
CHECK ABSCM&H/U.
Connect all connectors.Erase the memory.
Perform the inspection mode.
Read out the DTC.
Is the same DTC as in current diagnosis still being output?
| Yes |
Replace the ABSCM&H/U.
| No |
CHECK ANY OTHER DTC APPEARANCE.
Are other DTCs being output?
| Yes |
Proceed with the diagnosis corresponding to DTC.
| No |
A temporary poor contact.
