PRE-RELEASE
Slave cylinder
| Slave cylinder |
| To remove |
| 1. |
Remove the gearbox, see Transmission, Manual gearbox
.
|
|
| 2. |
Detach the delivery pipe.
|
|
| 3. |
Remove the three slave cylinder retaining bolts and pull out the slave cylinder.
|
|
| Fitting |
| 1. |
Apply Loctite 577 to the retaining screws, see
.
|
|
| 2. |
Screw on the slave cylinder.
Tightening torque 10 Nm (7 lbf ft) |
|
| 3. |
Fit the delivery pipe to the slave cylinder.
Tightening torque 22 Nm (16 lbf ft) |
|
| 4. |
Bleed the slave cylinder before fitting the gearbox, see
.
|
|
| 5. |
Fit the gearbox, see Transmission, Manual gearbox
.
|
|
| 6. |
Bleed the clutch as described in
.
|
|
