Replacement of protective shell, rear bumper
|
|
Replacement of protective shell, rear bumper
|
|
1.
|
Remove the bumper, see
. Place it on a surface where it will be well protected.
|
|
2.
|
Remove the bumper rail from the protective shell by removing it from the 10 retaining clips that secure it to the protective shell
|
|
3.
|
Remove the cell section from the protective shell (wedged into the protective shell retaining corners).
|
|
1.
|
Press the cell section into the protective shell.
|
|
2.
|
Refit the rail in the protective shell.
|
Note
|
|
The rail should be positioned correctly by means of the locating stud.
|
|
|
3.
|
Fit the upper cell block.
|
|
4.
|
Refit the bumper, see
|
