Engine oil level monitor (243)
|
|
Engine oil level monitor (243)
|
(in-situ)
|
1.
|
Remove the oil sump as described under
Oil sump
.
|
|
2.
|
Remove the circlip from the connector.
|
|
3.
|
Remove the connector and the oil level sensor from the oil sump.
|
Note
|
|
Position for sensor and wiring.
|
|
|
1.
|
Check that there are no impurities or other foreign matter in the sump and clean the sealing surfaces with benzine.
|
|
2.
|
Fit the connector with a new O-ring greased with vaseline. Fit the circlip.
|
|
3.
|
Fit the oil level sensor in the position illustrated.
|
|
4.
|
Fit the oil sump as described under
To fit
.
|
