PRE-RELEASE
Anti-roll bar, To remove and To fit, Z18XE
| Anti-roll bar, To remove and To fit, Z18XE |
To remove
| 1. |
Remove the subframe.
Subframe, To remove and To fit, Z18XE
|
|
| 2. |
Remove the anti-roll bar (2) from the front axle beam
2 x Unscrew bolt for mounting bracket (3) on both sides Instructions: Mark fitting position. |
|
| 3. |
Remove the anti-roll bar damping rubber.
To fit |
|
| 4. |
Fit the anti-roll bar (2) on the front axle beam
Attach the damping rubber on the anti-roll bar and adjust Instructions: Note fitting position and marking. 2 x Screw in bolt for mounting bracket (3) on both sides 20 Nm
|
|
| 5. |
Fit the subframe.
Subframe, To remove and To fit, Z18XE
.
|
|
