PRE-RELEASE
Multi-belt tension, check
| Multi-belt tension, check |
| 1. |
Multi-belt tension is adjusted with the automatic multi-belt tensioning pulley.
|
|
| 2. |
Only the position of the moving tensioning arm (1) on the tensioning device can be checked. It should be between the stops (2).
|
|
| 3. |
If the moving tensioning arm (1) on the tensioning device is up against either of the stops (2), the multi-belt and tensioning device must be changed - see
Multi-belt, removing and fitting
and
Tensioning device for multi-belt, removing and fitting
.
|
|
