PRE-RELEASE
Wiring harness, tailgate
| Wiring harness, tailgate |
| To remove |
| 1. |
Remove
Tailgate trim
|
|
| 2. |
Remove
Upper spoiler, 5D
.
|
|
| 3. |
Remove the speakers and unplug the connectors.
|
|
| 4. |
Mark how the wiring harness is fitted.
|
|
| 5. |
Unplug the wiring harness connector and undo the clips.
|
|
| 6. |
Remove the hinge seals and the cable groovers on the hinges.
|
|
| 7. |
Remove
Rear side trim, 5D
on the right side.
|
|
| 8. |
Unplug the wiring harness connector.
|
|
| 9. |
Detach the ground cable
|
|
| 10. |
Remove the load grille mountings on the right side.
|
|
| 11. |
Remove the rear clips of the headlining by turning them 90°.
|
|
| 12. |
Carefully bend down the headlining to access the cable holder.
|
|
| 13. |
Remove the cable holder and open the clips. Remove the wiring harness from the cable holder.
|
|
| 14. |
Remove the entire wiring harness.
|
|
| To fit |
| 1. |
Route and position the wiring harness.
Plug in the wiring harness connector and fit the clips. 
|
|
| 2. |
Fit the wiring harness in the cable holder. Fit the cable holder clips. Fit the cable holder.
|
|
| 3. |
Reposition the headlining.
|
|
| 4. |
Fit the rear clips of the headlining.
|
|
| 5. |
Fit the load grille mountings on the right side.
|
|
| 6. |
Attach the ground cable.
|
|
| 7. |
Plug in the wiring harness connector.
|
|
| 8. |
Fit
Rear side trim, 5D
on the right side.
|
|
| 9. |
Fit the hinge seals and the cable groovers on the hinges.
|
|
| 10. |
Fit the speakers and plug in the connectors.
|
|
| 11. |
Fit
Upper spoiler, 5D
.
|
|
| 12. |
Fit
Tailgate trim
|
|
| 13. |
Check the function of the wiper and washer.
|
|
