PRE-RELEASE
Differential clutch
| Differential clutch |
|
|||||||
Warning
| Important | ||
|
It is very important to observe maximum cleanliness when working on the differential clutch. Dirt particles can seriously damage the function and service life of the differential clutch. |
||
| To remove |
| 1. |
Remove
complete unit, differential clutch and limited slip differential
.
|
|
| 2. |
Cars with limited slip differential clutch: Remove the hydraulic pipes (A) fit tool
DT-49132
(B). Turn the tool (C) slightly and pull the pipe out from the quick-release coupling.
|
|
| 3. |
Cars with limited slip differential clutch: Remove the clips for the wiring harness.
|
|
| 4. |
Remove the bolts (A) to the differential clutch.
|
|
| 5. |
Remove the differential clutch.
|
|
| To fit |
| 1. |
Fit the differential clutch. Tighten the bolts (A).
Tightening torque: 30 Nm (22 lbf ft)
|
|
| 2. |
Cars with limited slip differential clutch: Fit the clips for the wiring harness.
|
|
| 3. |
Cars with limited slip differential clutch: Fit the hydraulic pipes (A) to the quick-release couplings and check that the pipes are fitted firmly.
|
|
| 4. |
Fill with fluid in the differential clutch in accordance with
Fluid capacity and grade of fluid
.
|
|
| 5. |
Fit
complete unit, differential clutch and limited slip differential
.
|
|
