PRE-RELEASE
Rear subframe bush, replacement
| Rear subframe bush, replacement |
| To remove |
| 1. |
Remove the subframe, see
Subframe, 4WD
or
Subframe.
|
|
| 2. |
Press out the bush using the pull rod (A) from
89 96 779 Set of press sleeves, front assembly
(or a hydraulic press) and
89 96 928 Removal tool, rear subframe bushes
(B).
|
|
| To fit |
| 1. |
Fit the bush with washer (A) in the longitudinal direction of the car.
|
|
| 2. |
Press out the bush using the pull rod (A) from
89 96 779 Set of press sleeves, front assembly
(or a hydraulic press),
89 96 910 Fitting tool, rear subframe bushes
(B), and
CH-49233 Press tool
(C).
|
|
| 3. |
Fit the subframe. See
Subframe, 4WD
or
Subframe.
|
|
