PRE-RELEASE
Door lock unit, CV
| Door lock unit, CV |
| To remove |
| 1. |
Right door
: Raise the window to the highest position.
Left door : Remove Side window, door, CV . |
|
| 2. |
Remove
Door trim, CV
. Fold down the moisture barrier.
|
|
| 3. |
Cars with guard
: Remove the guard's screws.
|
|
| 4. |
Remove the lock cover from the rod.
|
|
| 5. |
Remove the rod from the clip.
|
|
| 6. |
Remove the lock bolts. Allow the lock to hang freely.
|
|
| 7. |
Cars with guard
: Remove the guard by pulling the guard forward and downward and then lifting it out.
|
|
| 8. |
Remove the upper rear nut for the handle and lock cylinder.
|
|
| 9. |
Left door
: Turn the lock cylinder anti-clockwise and pull out the cylinder from the handle.
|
|
| 10. |
Left door
: Unhook the cylinder from the lock rod.
|
|
| 11. |
Lift up the lock in order to unhook the lock button rod.
|
|
| 12. |
Remove the lock from the door at an angle.
|
|
| 13. |
Remove the holder for the connector cable stem.
|
|
| 14. |
Unplug the connector.
|
|
| 15. |
Remove the inner handle cable from the lock unit by pushing in the cable retaining clip from the back side.
|
|
| 16. |
Remove the rod from the lock unit.
|
|
| To fit |
| 1. |
Left door
: Hook the lock cylinder rod to the lock unit.
|
|
| 2. |
Fit the inner door handle cable in the lock unit.
|
|
| 3. |
Plug in the lock unit connector and fit the holder for the connector cable stem.
|
|
| 4. |
Insert the lock into position and hook on the lock button rod.
|
|
| 5. |
Left door
: Hook the lock cylinder to the rod.
|
|
| 6. |
Left door
: Fit the lock cylinder by pushing the lock cylinder and turning it clockwise.
|
|
| 7. |
Fit the handle's upper rear nut.
|
|
| 8. |
Cars with guard
: Insert the guard. Make sure the rod from the handle is in front of the guard.
|
|
| 9. |
Lift up the lock and secure it with a bolt. Also, thread the bolts for the guard (certain cars only) and lock. Start by tightening the lock bolts followed by the guard bolts.
|
|
| 10. |
Push the rod into the clip.
|
|
| 11. |
Lift in the clip at the same time as you fit the lock cover to eliminate play.
|
|
| 12. |
Check the function of the lock, lock cylinder and the outer handle.
|
|
| 13. |
Left door
: Fit
Side window, door, CV
.
|
|
| 14. |
Fit the plastic water barrier.
|
|
| 15. |
Fit the
Door trim, CV
.
|
|
| 16. |
Cars with pinch protection
: Perform
Programming of the pinch protection
.
|
|
