PRE-RELEASE
Limited slip differential
| Limited slip differential |
|
|||||||
Warning
| To remove |
| 1. |
Remove
complete unit, differential clutch and limited slip differential
.
|
|
| 2. |
Cars with limited slip differential clutch: Remove the hydraulic pipes (A) fit tool
DT-49132
(B). Turn the tool (C) slightly and pull the pipe out from the quick-release coupling.
|
|
| 3. |
Cars with limited slip differential clutch: Remove the clips for the wiring harness.
|
|
| 4. |
Cars with limited slip differential clutch: Remove the bolts (A) to the limited slip differential clutch.
|
|
| 5. |
Cars with limited slip differential clutch: Carefully remove the limited slip differential clutch unit.
|
|
| 6. |
Remove the bolts (A) to the limited slip differential.
|
|
| 7. |
Remove the limited slip differential.
|
|
| To fit |
| 1. |
Fit the limited slip differential. Tighten the bolts (A).
Tightening torque: 30 Nm (22 lbf ft)
|
|
| 2. |
Cars with limited slip differential clutch: Fit the limited slip differential clutch unit with a new seal. Tighten the bolts (A).
Tightening torque: 30 Nm (22 lbf ft)
|
|
| 3. |
Cars with limited slip differential clutch: Fit the clips for the wiring harness.
|
|
| 4. |
Cars with limited slip differential clutch: Fit the hydraulic pipes (A) to the quick-release couplings and check that the pipes are fitted firmly.
|
|
| 5. |
Fit
complete unit, differential clutch and limited slip differential
.
|
|
| 6. |
Fill oil in the limited slip differential in accordance with
Checking/changing oil in the limited slip differential
.
|
|
| 7. |
Check/adjust the fluid level in the differential clutch.
|
|
