Limited slip differential, seal
|
|
Limited slip differential, seal
|
|
1.
|
Drain the oil from the limited slip differential and fit the drain plug with a new seal.
Tightening torque 25 Nm (18.4 lbf ft)
|
|
3.
|
Seal the drive shaft holes in the limited slip differential and clean the housing.
|
Important
|
|
Take care to ensure that the differential clutch control module and differential brake valve are not damaged.
|
|
|
|
|
4.
|
Place the unit on its side.
|
|
5.
|
Remove the bolts. (A)
|
|
6.
|
Remove th right-hand limited slip differential housing (B).
|
|
1.
|
Clean sealant from the sealing surfaces and wash with a suitable degreaser.
|
|
3.
|
Fit the right-hand limited slip differential housing (B) using new bolts (A).
Tightening torque 45 Nm (33 lbf ft)
|
|
5.
|
Fill the limited slip differential with oil, using a clean funnel and hose. The oil level should be below the hole. See
Oil type and volume
.
|
|
6.
|
Fit the level plug with a new sealing washer.
Tightening torque 25 Nm (18.4 lbf ft)
|
