PRE-RELEASE

Camshaft pinion, A20NFT/LHU

To remove

1.	Remove the camshaft cover, see Camshaft cover with gasket, A20NFT/LHU .

2.	Remove the upper timing chain guide, see Timing chain, upper, A20NFT/LHU

3.	Remove the chain tensioner, see Timing chain tensioner .

4.	Remove the camshaft pinion screws (A). Counterhold using a wrench (B) on the camshaft flat.

5.	Remove the camshaft pinions (C).

To fit

1.	For correct setting, see information in Timing chain, A20NFT/LHU .

2.	Fit the camshaft pinions (C). Make sure the drive guide enters the shaft hole. The camshaft may need to be rotated for it to engage correctly.

3.	Fit the camshaft pinion screws (A). Counterhold using a wrench (B) on the camshaft flat. Tightening torque: 30 Nm + 100° (22 lbf ft + 100°)

4.	Fit the chain tensioner, see Timing chain tensioner .

5.	Fit the upper timing chain guide, see Timing chain, upper, A20NFT/LHU .

6.	Remove the camshaft cover, see Camshaft cover with gasket, A20NFT/LHU .

PRE-RELEASE

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.

Our Friends