PRE-RELEASE
Camshaft cover with gasket, A20NFT/LHU
| Camshaft cover with gasket, A20NFT/LHU |
| To remove |
| 1. |
Remove the upper engine cover.
|
|
| 2. |
Remove upper pressure pipe. See
Upper pressure pipe, charge air cooler, A20NFT/LHU
.
|
|
| 3. |
Remove air filter housing cover. See
Air filter, A20NFT/LHU
.
|
|
| 4. |
Remove air cleaner connection. See
Air cleaner connection hose A20NFT/LHU.
|
|
| 5. |
Remove the crankcase ventilation hose (A) from the turbo.
|
|
| 6. |
Remove bracket (A) for hoses/pipes.
|
|
| 7. |
Remove the ignition coils. See
Ignition coil with integrated power amplifier (320), A20NFT/LHU
.
|
|
| 8. |
Undo contact housing (A) and remove and move to one side the wiring harness (B) from the camshaft cover.
|
|
| 9. |
Remove the camshaft cover (A).
|
|
| 10. |
Remove the camshaft cover gasket and seals around the spark plug holes.
|
|
| To fit |
| 1. |
Fit the camshaft cover (A) with new gaskets for the screws. Check that the gaskets remain in place during fitting.
Tightening torque 10 Nm (7 lbf ft)
|
|
| 2. |
Fit wiring harness (B) to the camshaft cover and connect contact housing (A).
|
|
| 3. |
Fit the ignition coils. See
Ignition coil with integrated power amplifier (320), A20NFT/LHU
.
|
|
| 4. |
Fit bracket (A) for hoses/pipes.
|
|
| 5. |
Fit the crankcase ventilation hose (A) to the turbo.
|
|
| 6. |
Fit air cleaner connection. See
Air cleaner connection hose A20NFT/LHU
.
|
|
| 7. |
Fit air filter housing cover. See
Air filter, A20NFT/LHU.
|
|
| 8. |
Fit upper pressure pipe. See
Upper pressure pipe, charge air cooler, A20NFT/LHU
.
|
|
| 9. |
Fit the upper engine cover.
|
|
