PRE-RELEASE
Power steering pipe, RHD
| Power steering pipe, RHD |
| Important | ||
|
Scrupulous cleanliness must always be observed during all work with hydraulic components. |
||
| Important | ||
|
Always use wing covers when working in the engine bay. |
||
| To remove |
| 1. |
Remove the power steering unit. See
Power steering unit, Z19
.
|
|
| 2. |
Detach the power steering unit bracket from the steering gear and move aside.
|
|
| 3. |
Remove the bolt holding the pipe to the steering gear.
|
|
| 4. |
Remove the power steering pipes.
|
|
| To fit |
| 1. |
Fit the power steering pipes to the steering gear.
Tightening torque 20 Nm (14.8 lbf ft) 
|
|||||||
| 2. |
Fit the bracket to the steering gear so that the wiring harness lies between it and the delivery pipe.
Tightening torque 20 Nm (14.8 lbf ft) |
|
| 3. |
Fit the power steering unit. See
Power steering unit, Z19
.
|
|
