PRE-RELEASE
Tailgate moulding, 5D
| Tailgate moulding, 5D |
| To remove |
| 1. |
Remove
Tailgate trim
.
|
|
| 2. |
Remove the speaker connectors. Remove the holders for the speakers.
|
|
| 3. |
Remove the nuts holding the moulding on the tailgate.
|
|
| 4. |
Unplug the connector.
|
|
| 5. |
Close the tailgate. Have the remote control prepared in case the tailgate does not lock.
|
|
| 6. |
Pull out the moulding.
|
|
| 7. |
When changing the moulding
:
|
|
| 7.a. |
Remove the nuts holding the handle to the moulding and prise loose the handle using
82 93 474 Removal tool
.
|
| 7.b. |
Transfer the studs and clips.
|
| 7.c. |
Fit the handle to the moulding.
|
| To fit |
| 1. |
Insert the connector through the passage. Put in place the moulding.
|
|
| 2. |
Open the tailgate. Fit the nuts holding the moulding.
|
|
| 3. |
Plug in the connector.
|
|
| 4. |
Fit the speaker holders and plug in the connector.
|
|
| 5. |
Fit
Tailgate trim
.
|
|
| 6. |
When changing the moulding
: Fit a new emblem.
|
|
| 7. |
Check that the lock is working.
|
|
