PRE-RELEASE
Tailgate, microswitch, 5D
| Tailgate, microswitch, 5D |
| To remove |
| 1. |
Remove
Tailgate trim
.
|
|
| 2. |
Remove the speaker holders.
|
|
| 3. |
Remove the nuts holding the moulding on the tailgate.
|
|
| 4. |
Unplug the connector.
|
|
| 5. |
Close the tailgate.
|
|
| 6. |
Pull out the moulding.
|
|
| 7. |
Remove the catch securing the microswitch using a screwdriver in the edge of the catch.
|
|
| 8. |
Unplug the flat pin connector to the microswitch.
|
|
| 9. |
Remove the microswitch with wiring harness.
|
|
| To fit |
| 1. |
Fit the microswitch.
|
|
| 2. |
Connect the flat pins.
|
|
| 3. |
Fit the catch securing the microswitch. Make sure it engages properly.
|
|
| 4. |
Fit the moulding to the tailgate.
|
|
| 5. |
Fit the nuts holding the moulding.
|
|
| 6. |
Fit the connector.
|
|
| 7. |
Remove the speaker holders. Plug in the connector.
|
|
| 8. |
Carry out a functional check.
|
|
| 9. |
Fit
Tailgate trim
.
|
|
