SAAB WIS ONLINE

PRE-RELEASE

Turbocharger Oil Feed Pipe Replacement

Turbocharger Oil Feed Pipe Replacement



Callout Component Name

Preliminary Procedures

1. Remove the battery positive cable on the B+ stud at the back of the generator. Refer to Generator Replacement (LAU) Generator Replacement (LF1) .

2. Remove the left exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side (LAU) .

3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

4. If necessary, remove the engine oil cooler outlet hose. Refer to Engine Oil Cooler Outlet Hose Replacement (LAU) .


1 Banjo Bolt Refer to Fastener Caution .

Tighten

35 Nm (26 lb ft)
2 Banjo Bolt

Tighten

35 Nm (26 lb ft)
3 Turbocharger Oil Feed Pipe Bracket Bolt

Tighten

10 Nm (89 lb in)
4 Turbocharger Oil Feed Pipe


PRE-RELEASE