PRE-RELEASE
Ignition Coil Replacement - Bank 2
| Ignition Coil Replacement - Bank 2 |
| Removal Procedure |
| 1. |
Remove the intake manifold. Refer to
Intake Manifold Replacement
.
|
|
| 2. |
Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
|
|
| 3. |
Remove the ignition coil bolt(s).
|
|
| 4. |
Remove the ignition coil(s).
|
|
| Installation Procedure |
| 1. |
Install the ignition coil(s).
|
|
| 2. |
Refer to
Fastener Caution
.
Install the ignition coil bolt(s). TightenTighten the bolt(s) with 10 Nm (89 lb in). |
|
| 3. |
Connect the engine wiring harness electrical connector(s) (5) to the ignition coil(s) (4).
|
|
| 4. |
Install the intake manifold. Refer to
Intake Manifold Replacement
.
|
|
