PRE-RELEASE
DTC B0550
| DTC B0550 |
| Diagnostic Instructions |
| • |
Perform the
Diagnostic System Check - Vehicle
prior to using this diagnostic procedure.
|
|
| • |
Review
Strategy Based Diagnosis
for an overview of the diagnostic approach.
|
|
| • |
Diagnostic Procedure Instructions
provides an overview of each diagnostic category.
|
|
| DTC Descriptor |
DTC B0550 32
Odometer Circuit General Memory Malfunction
| Circuit/System Description |
The instrument cluster is equipped with odometers that indicate the distance traveled by the vehicle. One type of odometer is the season odometer where the traveled distance can not be reset by the driver. This information is also stored in the body control module (BCM). In addition to storing the seasonal odometer value for the vehicle, the instrument cluster and the BCM store the VIN. Software checks are performed to ensure these modules, and their stored seasonal odometer information, can not be move or transferred between different vehicles.
| Conditions for Running the DTC |
The ignition is ON.
| Conditions for Setting the DTC |
The BCM has detected an internal memory malfunction.
| Action Taken When the DTC Sets |
DTC B0550 32 is stored in the BCM memory.
| Conditions for Clearing the DTC |
The BCM no longer detects a malfunction.
| Reference Information |
Schematic Reference
Instrument Cluster Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Driver Information Center (DIC) Description and Operation
Electrical Information Reference
| • |
Circuit Testing
|
|
| • |
Connector Repairs
|
|
| • |
Testing for Intermittent Conditions and Poor Connections
|
|
| • |
Wiring Repairs
|
|
Scan Tool Reference
Control Module References for scan tool information
| Circuit/System Verification |
Verify that DTC B0550 32 is not set.
| Repair Instructions |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for BCM replacement, programming and setup
